[TOOL] EAH | Empyrion Admin Helper v1.61.x

Discussion in 'The Hangar Bay' started by RexXxuS, Apr 30, 2016.

  1. EnRKc

    EnRKc Ensign

    Joined:
    Apr 26, 2017
    Messages:
    7
    Likes Received:
    2
    Updated to 6.0.8 yesterday and then re-downloaded EAH off its website. I tried the link up above too. Nothing works. Checked port forwarding to make sure server and telnet were included. I can't think of anything else.

    I last wiped yesterday but only the saves folder. I'll try a total nuke tonight.
     
    #321
  2. joemorin73

    joemorin73 Captain

    Joined:
    Aug 24, 2016
    Messages:
    319
    Likes Received:
    170
    As pointed out, Telnet isn't used anymore. So technically. this should be easier for you. (Should....... Sadly, doesn't mean always. ;) )
     
    #322
    EnRKc likes this.
  3. Taelyn

    Taelyn Guest

    the power button isnt from telnet anymore but from the API. In the tool config there is an API IP and a port.
    Make sure its set to 127.0.0.1 and 12345. In the content folder from the dedicated server is a MOD map and then EMP. In that map there is a config.txt open it and check what IP and port it says. Should be standaard 127.0.0.1 and port 12345. If it doesnt or if tool doesnt make sure it gets those numbers. Restart tool and server and then it should work.

    Jascha advised me NOT to change the IP of the API yet since there is no protection yet. If u do change it ppl from outside can control your sever.
    127.0.0.1 is a local only address.

    It might be that its your issue.

    If the tool and the file does give that address remove the EMP folder and restart tool. It will remake that folder and things should work aswell.
    I have had that problem and removeing the folder fixed it for me
     
    #323
    EnRKc and joemorin73 like this.
  4. EnRKc

    EnRKc Ensign

    Joined:
    Apr 26, 2017
    Messages:
    7
    Likes Received:
    2
    That sounds like the solution. I'll try it out tonight and try to report back. If not, no news is good news.

    Thanks for the help guys

    Confirmed: Problem Solved!
     
    #324
    Last edited: Apr 28, 2017
    Taelyn likes this.
  5. zamirathe

    zamirathe Lieutenant

    Joined:
    Nov 16, 2016
    Messages:
    20
    Likes Received:
    1
    Wanted to note that the option to uncheck the Public Server does not save in the helper. I uncheck Public Server and restart server and tool as it says. The line for public_srv IS gone from the dedicated.yaml file itself, but in the helper it remains checked. So the next time I close the tool, it makes the server public again unless I remember to go in and uncheck it before I close the application.
     
    #325
  6. Jascha

    Jascha Administrator

    • Moderator
    Joined:
    Jan 22, 2016
    Messages:
    1,141
    Likes Received:
    713
    Thanks. Will check it
     
    #326
  7. zamirathe

    zamirathe Lieutenant

    Joined:
    Nov 16, 2016
    Messages:
    20
    Likes Received:
    1
    You're welcome.
    Just had someone log in my server and the Server_Prv (may have gotten the exact key spelling wrong) is not in the dedicated.yaml as I just checked it. I guess it will have to be changed to False instead of just removed.
     
    #327
  8. EnRKc

    EnRKc Ensign

    Joined:
    Apr 26, 2017
    Messages:
    7
    Likes Received:
    2
    I am having trouble with another check box. Origin Access Others is stuck on. It looks like the tool deletes that line from that config yaml.
     
    #328
  9. Jascha

    Jascha Administrator

    • Moderator
    Joined:
    Jan 22, 2016
    Messages:
    1,141
    Likes Received:
    713
    Thanks a lot. Will look into both.
     
    #329
  10. Jascha

    Jascha Administrator

    • Moderator
    Joined:
    Jan 22, 2016
    Messages:
    1,141
    Likes Received:
    713
    #330
    jmcburn and Taelyn like this.
  11. Jascha

    Jascha Administrator

    • Moderator
    Joined:
    Jan 22, 2016
    Messages:
    1,141
    Likes Received:
    713
    Smal update for new EXP Version.
    Not much change, therefore no Patch-Notes.
     
    #331
    Taelyn and jmcburn like this.
  12. Alexandra

    Alexandra Ensign

    Joined:
    Apr 9, 2017
    Messages:
    22
    Likes Received:
    2
    Hello! It's great tool! Thank You!

    How to support your development? How to Pay?
     
    #332
  13. Jascha

    Jascha Administrator

    • Moderator
    Joined:
    Jan 22, 2016
    Messages:
    1,141
    Likes Received:
    713
    Thanks a lot. Happy to hear that.
    How can you contribute? Well... just enjoy the Game and help the devs to find bugs and improve the game. And of course if you have suggestions or bugs for the tool, let us know. But we dont take money for it anymore!
    Thanks though :)
     
    #333
  14. Jackall

    Jackall Commander

    Joined:
    May 12, 2017
    Messages:
    165
    Likes Received:
    47
    Heyo! Thank you for a great program! I am using it on my 5.5 server currently.

    Anyhow, just created a new 6.x server and downloaded the Alpha 6 EmpAdminHelper Full. It runs the server but will not shut it down.

    I found this in the logs:

    Date Time Status Message
    16.05.2017 12:34:03.459 I Now listening on ip 127.0.0.1 with port 12345
    16.05.2017 12:34:03.495 W MTP: TCP Listener was still open and will be closed
    16.05.2017 12:35:41.576 I Now listening on ip 127.0.0.1 with port 12345
    16.05.2017 12:35:41.612 W MTP: TCP Listener was still open and will be closed
    16.05.2017 15:00:53.754 I Now listening on ip 127.0.0.1 with port 12345
    16.05.2017 15:00:53.790 W MTP: TCP Listener was still open and will be closed
    16.05.2017 15:04:13.401 I Now listening on ip 127.0.0.1 with port 12345
    16.05.2017 15:04:13.438 W MTP: TCP Listener was still open and will be closed
    16.05.2017 15:08:53.993 I Now listening on ip 127.0.0.1 with port 12345
    16.05.2017 15:08:54.033 W MTP: TCP Listener was still open and will be closed
    16.05.2017 15:35:16.978 I Now listening on ip 127.0.0.1 with port 12345
    16.05.2017 15:35:17.015 W MTP: TCP Listener was still open and will be closed
    16.05.2017 15:37:13.861 I Now listening on ip 127.0.0.1 with port 12345
    16.05.2017 15:37:14.684 I MTH: Thread Writer-127.0.0.1:57848 exception: System.TypeLoadException: Could not load type 'Eleon.Modding.ChatInfo' from assembly 'Mif, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'.
    16.05.2017 15:39:08.632 I Now listening on ip 127.0.0.1 with port 12345
    16.05.2017 15:39:08.668 W MTP: TCP Listener was still open and will be closed
    16.05.2017 15:39:57.783 I Now listening on ip 127.0.0.1 with port 12345
    16.05.2017 15:39:58.397 I MTH: Thread Reader-127.0.0.1:57926 exception: System.TypeLoadException: Could not load type 'Eleon.Modding.ChatInfo' from assembly 'Mif, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'.
    16.05.2017 15:39:58.397 I MTH: Thread Writer-127.0.0.1:57926 exception: System.TypeLoadException: Could not load type 'Eleon.Modding.ChatInfo' from assembly 'Mif, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'.
    16.05.2017 16:12:49.071 I Now listening on ip 127.0.0.1 with port 12345
    16.05.2017 16:12:49.299 I MTH: Thread Reader-127.0.0.1:58822 exception: System.TypeLoadException: Could not load type 'Eleon.Modding.ChatInfo' from assembly 'Mif, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'.
    16.05.2017 16:12:49.299 I MTH: Thread Writer-127.0.0.1:58822 exception: System.TypeLoadException: Could not load type 'Eleon.Modding.ChatInfo' from assembly 'Mif, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null'.
    16.05.2017 16:46:59.996 W MTP: TCP Listener was still open and will be closed
    16.05.2017 16:46:59.997 I MDP: Closing
    16.05.2017 16:47:00.003 E Error: System.NullReferenceException: Object reference not set to an instance of an object
    at ModProtocol.Close () [0x00000] in <filename unknown>:0 : More Infos: MDP: Close -

    I have the following settings:

    Server Port: 30000
    Telnet port: 30004
    Telnet enabled
    EAC Active
    ServerIp: ********
    Game Version: Alpha_6
    API IP: 127.0.0.1
    API Port: 12345

    What else do you need to know?

    Thank you!
     
    #334
    Last edited by a moderator: May 17, 2017
  15. stimdealer0001

    stimdealer0001 Captain

    Joined:
    Sep 14, 2015
    Messages:
    159
    Likes Received:
    149
    Is there a way...if not, can you add an option...to PREVENT the EAH tool from making any modifications to the dedicated.yaml file?

    Thanks again for the awesome tool, still using since pre-alpha! ^_^
     
    #335
  16. Jascha

    Jascha Administrator

    • Moderator
    Joined:
    Jan 22, 2016
    Messages:
    1,141
    Likes Received:
    713
    Hm, maybe something changed with the new Release. Can you post the Version number from the tool. And you are running the latest Alpha 6 RC2 release or?
    There is a difference in the Mif.dll, which is locatted in the ServerData-Folder in the Game. That one should be the same as in the Tool folder..

    Hey,

    glad you still like it. He should not change the dedicated unless you open the Dedicated Config. He just reads it once. But I will check it.
     
    #336
    stimdealer0001 likes this.
  17. Jackall

    Jackall Commander

    Joined:
    May 12, 2017
    Messages:
    165
    Likes Received:
    47
    I believe this was my fault. I thought setting it to v6 in the EAH tool would automatically set it to start up as v6. I was still using v5.5. I downloaded the correct version and that solved my problem.

    I'm learning.. slowly, but I am :D
     
    #337
    Last edited: May 17, 2017
    Jascha likes this.
  18. Jackall

    Jackall Commander

    Joined:
    May 12, 2017
    Messages:
    165
    Likes Received:
    47
    I'm having problems getting the CB to work. I have enabled it, even restarted my server but the CB:? is not responding. I see it highlighted in blue. I'm using the 2.7 alpha version.

    What am I missing?
     
    #338
    Last edited: May 22, 2017
  19. Jascha

    Jascha Administrator

    • Moderator
    Joined:
    Jan 22, 2016
    Messages:
    1,141
    Likes Received:
    713
    Hey, what do you mean with 2.7 Alpha Version?
    Which Tool and which Game Version do you use?
    Did you enable ChatBot in the config?
     
    #339
  20. Jackall

    Jackall Commander

    Joined:
    May 12, 2017
    Messages:
    165
    Likes Received:
    47
    lol sry I was looking at my remote desktop manager version I meant I have the latest 1.35.02 alpha release of EAH running 6.x.

    Yes ChatBot is enabled. I even restarted thee server to see if that would help, no luck.

    Ty
     
    #340

Share This Page