CPU values not matching Blueprint/Control Panel [6791]

Discussion in 'Fixed (Read Only)' started by Robot Shark, Dec 1, 2019.

  1. Robot Shark

    Robot Shark Rear Admiral

    Joined:
    Jul 3, 2016
    Messages:
    2,171
    Likes Received:
    5,743
    Mode: N/A
    Mode: Singleplayer

    SERVER NAME: N/A
    SEED-ID: N/A

    Reproducibility: Always
    Severity: Minor

    Type: CPU

    Summary: CPU values do not match on the Blueprint & Control Panel screens.

    Description: When you compare the CPU value in the factory and on the CPU screen in the control panel the numbers do not match. Also, when you look at the control panel CPU screen a number of blocks are identified as small blocks, even though the player used large blocks.

    Steps to Reproduce: Compare the CPU values in the factory and control panel.

    200,712 Vs. 199,990. So there is a difference of 722 CPU points.
    [​IMG]

    [​IMG]
     
    #1
    krazzykid2006 and Germanicus like this.
  2. Germanicus

    Germanicus Rear Admiral

    Joined:
    Jan 22, 2018
    Messages:
    5,032
    Likes Received:
    8,757
    Saw the same Issue, in my Case with a Base in Space CP-CPU 55.709; BP-Factory 79.435

    NewGame_2019-11-30_09-57-49.png NewGame_2019-11-30_09-57-17.png
     
    #2
    krazzykid2006 likes this.
  3. wrenchinator

    wrenchinator Commander

    Joined:
    Jan 6, 2016
    Messages:
    79
    Likes Received:
    86
    I also see this on my recent SV and CV builds.
     
    #3
    Robot Shark and Germanicus like this.
  4. Robot Shark

    Robot Shark Rear Admiral

    Joined:
    Jul 3, 2016
    Messages:
    2,171
    Likes Received:
    5,743
    Originally I thought it would only be effecting BA's and CV's because the blocks were not identified correctly.

    But...
    I checked some of my HV and SV builds and saw the same thing on them. So it's effecting everything.
     
    #4
    wrenchinator likes this.
  5. Pantera

    Pantera Administrator Staff Member

    • Developer
    • Moderator
    Joined:
    Aug 15, 2016
    Messages:
    3,403
    Likes Received:
    6,067
    Logged & will be looked into I found some also like this.
     
    #5
  6. Robot Shark

    Robot Shark Rear Admiral

    Joined:
    Jul 3, 2016
    Messages:
    2,171
    Likes Received:
    5,743
    I guess this is no longer an issue?
    The CPU points used is no longer displayed on the blueprint screen.

    (But I am still seeing large blocks being identified as small ones in the control panel.)
     
    #6
  7. Germanicus

    Germanicus Rear Admiral

    Joined:
    Jan 22, 2018
    Messages:
    5,032
    Likes Received:
    8,757
    Block shapes S and L are still in one list. Confirmed.
    The question is also if those "100% CPU" are accurate. Just will have to try to get close to the moment I would need an CPU Tier upgrade, save BP and check what the BP in Workshop shows...:rolleyes:
     
    #7
  8. Pantera

    Pantera Administrator Staff Member

    • Developer
    • Moderator
    Joined:
    Aug 15, 2016
    Messages:
    3,403
    Likes Received:
    6,067
    Yes it has been changed I'll close this.

    I'll check this tomorrow thanks.
     
    #8
    Germanicus likes this.

Share This Page