Build: 1.6.3 3512 Mode: Survival / Creative Mode: Single Player / Multiplayer Reproducibility: Always Severity: Minor Type: Effects Summary: The flares from thrusters placed in front of cockpit seats sometimes bleed through the thrusters and solid walls while seated. Description: In certain situations the blue flares from thrusters can appear stuck on the screen bleeding through walls as you pilot ships. Sometimes it is immediate, sometimes you have to maneuver around a bit before the flare bleeds through and gets stuck permanently overlaid. It only occurs when you are seated. Steps to Reproduce: Note: My graphics settings are all on high, except for depth of field which is off. 1) Load either of the attached two test CVs 2) Fly them around a little, changing direction. Eventually a blue flare becomes visible on the screen. For Flare Test 1 you will have to set your field of view to about 75 to see the flares bleed through. 3) With the Flare Test 1 CV remove the window and fly it around again. The stuck flares should go away. Replace the window and the flares come back. 4) With the Flare Test 2 CV remove the turret and fly it around again. The stuck flare should go away. Replace the turret and the flare comes back. Screenshots: Flare Test 1 ship: Standing in Flare Test 1: Seated in Flare Test 1: Flare Test 2 ship: View attachment 92263 Standing in Flare Test 2: Seated in Flare Test 2: Seated in Flare Test 2 after removing the turret:
