Supposed to guard the antenna ... assume I have to power the ship first? ben all over all 3 sections ... no power switch or place to put fuel. i wish the quest had better info. I have no idea what I ams upposed to do to tigger the "guard the antenna" event. All help appreciated.
As far as I know, there is no actual "guarding the antenna", it is a part of the story line. What you should be doing is either fighting off the Zirax drones in your ship or from the surface. The story line will continue whether you destroy them or not. If they did not trigger, then either you did not find all of the consoles (3, one in each part of the Titan) or it is bugged. You have to find the correct 3 consoles, then go to the bridge and activate the last console to activate the Drones. If you go straight to the bridge and use that console, you will get the text that the mission is starting, but it will not trigger until you complete the 3 consoles first. You do not need to power on the ship or do anything else other than survive after activating the 3 consoles, then the bridge console. Hope that helps
There are more than 3 consoles. You have to find the correct ones and activate them. All of that information should have popped up on your screen from the PDA, with waypoint markers leading to the consoles. Maybe your game is bugged?
thanks All. pretty sure I did the 3 correct consoles because it took me to the bridge next. That's where I was told I have to fight off the zorax until the message was sent. I am pretty sure I did everything right else I would not have known what I wrote about: at least your posts tell me I had it right. Must be bugged. I waited long enough to go through all 3 hull sections again looking for s power button (an hour?). Still no zorax.
It might be bugged on your playthrough. I just ran through a quick scenario of it. There is a second console on the mid section that has dialog, but it is not one of the consoles you need. I was also able to go to the bridge and get the dialog started but would not trigger the Zirax until I went to the consoles and clicked through all of the dialog and got the "ding" sound that I completed that action. I forgot to look and see if the option to "skip" is available. You could check in your PDA and see if you can manually complete the console part to trigger the attack. <edit> I just checked the PDA using the eWPDA tool and there is a manual completion button. Check your PDA and try manually completing the console parts of the mission, but be ready for the attack as soon as you do.
